A note about container technology is that at least with LXC or LXD, containers are not allowed to mount network folders. Instead, you need to mount via the host and expose the folder to the container.
Separate article will be written on setting up.
This is the key article to understand how to do it. It's not user based but ip range based on the Synology system,
Install nfs client software,
sudo apt-get install nfs-common |
After ensuring IP was setup properly it was just a matter of creating your mount path. This is a one time activity,
cd ~ mkdir -p mnt/guest.public # forget if I also need to make the subdirectory sudo mount -t nfs 192.168.0.5:/volume1/guest.public ./mnt/guest.public/ |
Connect your mount,
cd ~ mkdir -p mnt/guest.public # forget if I also need to make the subdirectory sudo mount -t nfs 192.168.0.5:/volume1/guest.public ./mnt/guest.public/ # confirm by looking at your files... |
Unmounting,
cd ~ umount ./mnt/guest.public/ |
Make the directories for fstab,
sudo su - serveradmin mkdir -p mnt/guest.public exit cd /home/serveradmin sudo mv ./mnt/ /opt/ |
...
sudo cp /etc/fstab /ect/fstab.v0.0 |
Add the following to the bottom of the file,
# Mount NFS drive 192.168.0.5:/volume1/guest.public /opt/mnt/guest.public/ nfs4 |
Reboot the machine...
..
Benchmark on best Mounting Protocol for Ubuntu
Speed Comparison - https://ferhatakgun.com/network-share-performance-differences-between-nfs-smb/