UFW (Uncomplicated Firewall) is a firewall software package that is a front-end to iptables that is easy to use initially and yet flexible enough for power users.
Install UFW if it not already installed,
sudo apt-get install ufw # install the firewall software |
UFW once installed does not automatically start. First open up ports that are necessary for the administration of the system,
sudo ufw allow 22 |
Additionally open other ports that you require. For this tutorial it would be,
sudo ufw allow 80 # Web Server sudo ufw allow 443 # SSL over Web Server |
Before starting UFW make sure you have port 22 open you can check again by running the allow 22 command again and if the rule is added should output.
sudo ufw allow 22 "Skipping adding existing rule" |
After you have confirmed 22 is open you can go ahead and enable UFW.
sudo ufw enable |
From your desktop, use Telnet to confirm 22 port is open,
telnet Ubuntuservername 22 # if you server is not named, user the server's IP address |
If telnet worked you should see something like this,
Connected to Ubuntuservername. Escape character is '^]'. ^] |
Finally check that all your rules are in place,
sudo ufw status verbose Status: active Logging: on (low) Default: deny (incoming), allow (outgoing) New profiles: skip To Action From -- ------ ---- 22 ALLOW IN Anywhere 80 ALLOW IN Anywhere 443 ALLOW IN Anywhere |
UFW status verbose will not work if UFW is not enabled. |
There is much more to UFW but the above steps should get you going.
You can disable or delete rules. The example shown here is two step,
sudo ufw deny 443 # Disables and leave the entry in the status. Useful for a port you leave on and off sometimes. sudo ufw delete deny 443 # Delete the rule. Here you must have it disabled to delete it. |
Not exactly intuitive is that the delete command needs to be literal. In the above example we had "delete deny port 443". If the port was enabled and we wanted to delete in one step, the command would look like this,
sudo ufw delete allow 443 # Deletes an enabled rule. |
You can put comment in the rules and have it show up in the ufw status
sudo ufw allow 22 comment 'enable TCP' |
This article can be improved in the following areas. |
How I can put comments in the firewall rules and have it show up in the ufw status? Using applications.d. Will add details from here,http://manpages.ubuntu.com/manpages/jaunty/en/man8/ufw.8.html
https://help.ubuntu.com/9.10/serverguide/C/firewall.html - official docs from Ubuntu.